|
|
||
 |
 |
 |
 |
| Sub menu | |||
 |
 |
||
 |
|
||
 |
|
||
 |
|
||
 |
|
||
| Twisted AV is a Dealer of: | ||
| AMX, BEST Access systems, BTX, Chief Mounts, Listen, Omni Mount. | ||
| Twisted AV uses distributors for everything else... |
| Contractor |
| Contractor Services we provide are: |
Programming of audio visual control systems |
|
|
AV design |
|
|
CAD drawings |
|
|
Tech writing - custom operation manuals |
|
|
Audio tuning - tune audio systems and program DSP units |
|
|
Video Conference - system setup & gateway setup |
|
|
Turn-key - trouble shoot problems to get sign-off |
|
|
Sub work - take on the whole project including installation |
|
 |
Top of Page | Home Page | Site Map |
| End User |
| End User Services we provide are: |
|
Programming of audio visual control systems |
|
|
AV design |
|
|
Installation |
|
|
Consulting |
|
|
Software solutions |
|
|
Top of Page | Home Page | Site Map |
| New Stuff |
| Microsoft Custom Software Solutions | |
| Coming soon "Twisted AV windows control" | |
| This software solution: |
|
Application for controlling AV equipment |
|
|
To use with PDA devices |
|
|
Works from YOUR PC |
|
|
Contact Us |
|
|
Top of Page | Home Page | Site Map |
| Help and tricks |
| Bluetooth If you are not using it... then get with it... |
 |
 |
Bluetooth serial receiver. Twisted AV is a reseller for AIRcable if you need one contact: Kholmlund@twistedav.com |
| You take this receiver and add a few parts and you become a mobile programmer that is cable free... |
 |
 |
| The AIRcable uses a size H power connector that you can get easily at Radio Shack. |
| You can also get creative and make cable assembly that let's you get power from equipment in the system already... |
| Why did I chose AIRcable, I have tried several units and the other units you had to configure the serial with a utility... this unit you set with dip switches and that saves time. |
| Keep it cool |
 |
 |
 |
| This is a custom installation of a Middle Atlantic FAN-10 with two GAURD-10. Also is a Hampton Bay ROTARY ACTION FAN CONTROL. | |
| The fan control is set at medium speed, this runs the fan at half speed. |
| Also, drilling adequate amount of holes through the toe kick and shelf allows ample amount of air flow. |
|
Top of Page | Home Page | Site Map |
| Ford 5.4L V8 tune-up |
 |
|
Tools you need: 3/8" Ratchet 3/8" 6" Extension 3/8" 3" Extension 3/8" Swivel 3/8" Spark-Plug Socket 1/4" Ratchet 1/4" 6" Extension 1/4" 4" Extension 1/4" 2" Extension 1/4" 8mm Deep Socket 1/4" 7mm Deep Socket 1/4" 7mm Socket 1/4" Swivel Spark-Plug Gap Gage Small Screwdriver Parts: 9" x 1/4" rubber fuel hose (Use as a tool to remove plugs) Anti-Seize 8- Motorcraft SP-479 |
|
| And when you do this you should at the same time... |
 |
|
Parts: MSD 82428-8 Coil-Caps Dielectric Grease |
|
Top of Page | Home Page | Site Map |